Description

[US ONLY] ERYONE PLA Filament 1kg 1.75mm Various Colors For FDM 3D Printers ERYONE PLA Filament is a top-notch 3D printing material, crafted from high-quality virgin plastic and vibrant colours. Our vacuum packaging ensures optimal freshness, while our tangle-free winding and tight tolerance control guarantee smooth, reliable prints. Committed to sustainability, ERYONE filament now comes on fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable PrintsMinimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited SmellERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed SealedERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is caused by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be caused. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material. [US ONLY] ERYONE PLA Filament 1kg 1.75mm Various Colors For FDM 3D Printers ERYONE PLA Filament is a top-notch 3D printing material, crafted from high-quality virgin plastic and vibrant colours. Our vacuum packaging ensures optimal freshness, while our tangle-free winding and tight tolerance control guarantee smooth, reliable prints. Committed to sustainability, ERYONE filament now comes on fully recyclable cardboard rolls. Compatible with popular 3D printers like: Creality 3D Artillery SUNLU Geeetech XVICO Eaythreed Features: Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable Prints Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise. Purest-grade Material | Made in USA | Non Toxic and Limited Smell ERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing. Professional Packaging | Vacuumed Sealed ERYONE is supplied in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. Specifications: Filament Diameter: 1.75mm Tolerance: ± 0.03mm Print Temperature: 190-220°C Recommended Print Temperature: 210-220°C Peak Melting Temp: 155±5°C> Heated Bed Temp: 55-70°C Recommended Print Speed 30-100mm/s Produced mainly from Corn Starch, eco friendly material. Net Weight: 1kg (inc spool) Gross Weight: 1.3-1.4kg Specific Gravity [g/cm3]: 1.24 MFR [g/10min]: 6 Tensile Strength [MPa]: 61 Elongation at Yield [%]: 3.2 FAQ: Clogging: Clogging is causéd by uneven wire diameter or too low a temperature. Clean the nozzle before use and raise the temperature to reduce the chance of clogging. Stringing: If the temperature is too high, the flow of PLA is too fast, or the feed parameters are not set properly, wire stringing will be causéd. Reducing the temperature and speed corrections will solve these issues. Over Extrusion: Too high a temperature, too slow speed, or nozzle diameter in the section does not match will cause too much extruding at the nozzle outlet, and there will be residual material. × × × × × × × × × × × × × × × × Tell a friend Visit store Watch now You might also like Bunny Rabbit Ear Hooded Sweatshirt Cute Women's Hoodie Harajuku Kawaii Pullover Flashforge PLA 3D Printer Filament: 1kg 1.75mm various colours 🇺🇸 1/2Inch Drive Impact Bolt & Nut Extractor Socket Set (17, 19, 21, 22mm) 🇺🇸 Xbox to HDMI Adapter for Original Xbox Console, HDMI 480p/720p/1080i Contact Should you have any questions regarding this item, please contact our Customer Service Team. Click the button below and our Customer Service team will be happy to assist. Ask seller a question © NSE Imports Postage All items are shipped with full tracking to ensure safe arrival. If we do not ship to your country please contact us for pricing, we will be happy to help. Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal PayPal Credit Google Pay Apple Pay Most major Credit and Debit cards Returns Returns are accepted, we hope your item arrives in good order and meets your expectations. Should this not be the case, please contact us before opening a return. Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by