Description

PLA Plus (PLA+) Filament 1.75mm with 20g Cleaning Filament, White PLA Pro 3D Printer Filament Toughness Enhanced, Premium PLA 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm 【Best Quality PLA Filament】Made by USA virgin PLA material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use, Superb layer bonding, Several times stronger than PLA. Ensure Diameter 1.75mm + / - 0.03 mm. 【Tangle-Free Tips】White PLA Plus Filament dried 24 hours before packaging and vacuum sealed with nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use. 【Printing Tips】Recommended Printing Temperature 200°C - 225°C, Bed 40°C - 60°C. PLA+ Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1". 【Cost-effective & Wide Compatibility】has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc. Product Description PLA+ Filament Printing Parameter Nozzle Temp：195-225℃ Ideal Temp：200℃ Heated Bed Temp：40℃~50℃ Print speed：90~140mm/s Density：1.24g/cm3 Melt Flow Index：3g /10 min, 190°C/2.16kg Heat Distortion Temp：47°C Tensile Strength：59Kg/cm2 PLA Pro Filament Features Low Odorless High Strength Better Toughness Low Shrinkage No Print Head Clogging Multiple Colors to Choose Compatible with Most of FDM 3D Printers FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PLA PLUS filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a longtime, it is recommended to replace a new one to ensure an strong first layer adhesion ; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.