Description

This generation of 300V has been discontinued. The formulation has been updated and received new (carbon fiber looking) cans. The new formula is even better than performance and offers even more performance than the silver can generation. You will be sent the very latest version of the product. Ships same day if ordered M-F before 4PM PST. Returns only accepted on UNOPENED cans. Application All racing Gasoline or Diesel engines, naturally aspirated or turbocharged, fitted with injection (direct/indirect) or carburetted. For race prepared engines operating over a wide range of rpm and temperatures. Features and Benefits STANDARDS Above existing Motorsport standards TYPE OF USE Rally – Short distance race The SAE 5W-30 viscosity allows excellent oil flow into the engine at start-up and fast oil pressure establishment while guaranteeing at hot temperature high oil pressure and faster engine revving. ESTER Core® TECHNOLOGY: For decades MOTUL has developed high performance synthetic Ester based lubricants. By selecting esters over other high performance synthetic base stocks and combining them with an innovative additive package, MOTUL has created a perfect synergy. This most advanced ESTER Core® technology allows maximum power output of the engine without compromising reliability and wear. ADVANTAGES The SAE 5W-30 viscosity enables to compensate medium engine oil dilution by unburned fuel. Maximum oil film resistance at very high temperature: Engine wear is reduced. Friction Modifier: Maximum power output, decrease operating temperature. Low volatility: Oil consumption is reduced. High shear stability: Stable oil pressure whatever using conditions. Recommendations For optimal engine performances avoid mixing with other synthetic or mineral lubricants. Suitable for alcohol based fuel with shortened drain interval. Oil Change: Consult your tuning service partner for the appropriate drain interval. Properties Viscosity grade SAE J 300 5W-30 Density at 20°C (68°F) ASTM D1298 0.859 Viscosity at 40°C (104°F) ASTM D445 64.0 mm²/s Viscosity at 100°C (212°F) ASTM D445 11.0 mm²/s HTHS viscosity at 150°C (302°F) ASTM D4741 3.5 mPa.s Viscosity Index ASTM D2270 165.0 Pour point ASTM D97 -48.0 °C / -54.0 °F TBN ASTM D2896 8.0 mg KOH/g Flash point ASTM D92 232.0 °C / 450.0 °F