Description

Technical Specification: Operating Voltage: DC 12V(fit 12V vehicles) Color Temperature: 6000K White IP68 rated water and dust seal, over 50000hrs lifetime Beam Angle: 360 degree Material: Aviation 6063 aluminum profile Operating Temperature: -40-80 degree Celsius Advantage: *Latest 3570 CSP chip light source, 2 luminous faces no blind zone *Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light *White light reflect road paint/signs better to show clearer road situation during night driving *270 degree low beam angle with cut-off line, will not dazzle oncoming traffic *Built-in constant current CPU, instant full brightness without start-up relay Install Caution *As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. *Put the vehicle into park or make sure it is securely in gear. *Be sure to turn off the ignition and remove the key. *Be careful to avoid burns, especially when turning on or off the vehicles lighting. *Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. *Fully examine the connection of the contact points, ports and the wires as faulty connections cancause lighting problems. *Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. Notice: 1.The product must be installed by professionals. Please disconnect the car battery before installation. Please check the wiring after installation. 2.Please reserve enough space in the headlight housing for installtion and heat dissipation. All our products are manufactured under the strictest quality control. If the project is not functioning properly, please contact us by email first. If you have any questions, please contact us in time.